Integrate with 4me

Automatically provision, update and deprovision users and groups in 4me from JumpCloud using the Identity Management (SCIM) integration. Leverage this integration to centralize user lifecycle, user identity, and group management in JumpCloud for 4me. Save time and avoid mistakes, as well as potential security risks, related to manually creating users.

Read this article to learn how to setup the 4me integration.


  • A JumpCloud administrator account.
  • A 4me user account, preferably a 4me directory account.

Important Considerations

  • 4me SCIM API is based on version 2.0 of the SCIM standard.
  • SAML 2.0 SSO is recommended, but not required, to use SCIM. See SSO using Pre-built Application Connectors.
  • If you need to update your token, you must deactivate the IdM integration, update the token, and then reactivate the IdM integration.
  • SCIM users are never really deleted in 4me, instead the active attribute of the SCIM user will be set to false and the related 4me person record will be disabled.

Attribute Considerations

  • A default set of attributes are managed for users. See the Attribute Mappings section for more details.
  • Filtering is available for the following logical operators and and or, attributes, operators:
    • userName
    • externalId
    • active
    • meta.lastModified
    • meta.created
    • eq(Equal to)
    • ne(Not equal to)
    • lt(Less than)
    • gt(Greater than)
  • The following attributes are not supported by JumpCloud:
    • manager
    • division
    • role
    • profileUrl
    • timezone
    • ims
    • photos
  • Groups are supported.

Group Management Important Considerations

Enabling Group Management

You must select the Enable management of User Groups and Group Membership in this application option to manage groups and group membership in the application from JumpCloud.

Group Provisioning and Syncing 

  • Empty groups are not created.
  • JumpCloud takes over management of existing groups in the application when the user group name in JumpCloud matches the name of the group in the application.
  • All user groups associated with the application in JumpCloud are synced. Syncing occurs whenever there is a membership or group change event.
  • Group renaming is supported.
  • If a user group is disassociated from the application in JumpCloud, syncing immediately stops and the group is left as-is in the application. All members of that user group are deactivated in the application unless they are associated with another active application group that is managed from JumpCloud.

Group Deletion

  • Managed groups deleted in JumpCloud are deleted in the application.
  • All members of the deleted group are deactivated in the application, unless they are associated with another active application group that is managed from JumpCloud.

Disabling Group Management

  • You can disable group and group membership management by unchecking the Enable management of User Groups and Group Membership in this application option.
  • The managed groups and group membership are left as-is in the application.
  • JumpCloud stops sending group membership information for the user, but the user’s identity will continue to be managed from JumpCloud.

Creating a new JumpCloud Application Integration

  1. Log in to the JumpCloud Admin Portal.
  2. Go to USER AUTHENTICATION SSO Applications.
  3. Click + Add New Application.
  4. Type the name of the application in the Search field and select it.
  5. Click Next.
  6. In the Display Label, type your name for the application. Optionally, you can enter a Description, adjust the User Portal Image and choose to hide or Show in User Portal.
  7. If this is a Bookmark application, enter its URL in the Bookmark URL field.
  8. Click Save Application.
  9. If successful, click:
    • Configure Application and go to the next section.
    • Close to configure your new connector at a later time.

Configuring the Identity Management Integration

To configure 4me

  1. Login to 4me as the account owner and go to the Settings console.
  2. Open the Apps menu and select the SCIM section.
  3. Copy the SCIM Bearer token.

To configure JumpCloud

  1. Create a new application or select it from the Configured Applications list.
  2. Select the Identity Management tab.
  3. Select the Enable management of User Groups and Group Membership in this application checkbox if you want to provision, manage, and sync groups in 4me from JumpCloud.
  4. Click Configure.
  5. In the Token Key fieldpaste the SCIM Bearer token you copied.
  6. Click Activate
  7. You will receive a confirmation that the Identity Management integration has been successfully verified.
  8. Click save.
  9. You can now connect user groups to the application in JumpCloud to provision the members of that group in 4me. Learn how to Authorize Users to an Application.

Attribute Mappings

The following table lists attributes that JumpCloud sends to the application. See Attribute Considerations for more information regarding attribute mapping considerations. 

Learn about JumpCloud Properties and how they work with system users in our API

4me User Attributes

JumpCloud Property JumpCloud UI Field Name SCIM v2 Mapping 4me Value
username Username userName userName
active Status active active
displayname Display Name displayName displayName
email Company Email emails:value emails
firstname First Name name.givenName name.givenName
lastname Last Name name.familyName name.familyName
firstname/lastname First Name/Last Name name.formatted name.formatted
middlename Middle Name name.middleName name.middleName
nickName NickName nickName nickName
employeeType employeeType userType userType
preferredLanguage preferredLanguage preferredLanguage preferredLanguage
locale Locale locale Locale
employeeIdentifier Employee ID employeeNumber employeeNumber
jobTitle Job Title jobTitle title
addresses.streetAddress Work Street Address addresses.streetAddress addresses.streetAddress
addresses.locality Work City addresses.locality addresses.locality
addresses.region Work State addresses.region addresses.region
addresses.postalCode Work Postal Code addresses.postalCode addresses.postalCode Work Country
phoneNumbers.value Work Phone phoneNumbers.value phoneNumbers.value
employeeIdentifier Employee ID externalId externalId
company Company organization organization
department Department department department
costcenter CostCenter costcenter costcenter
location Location location location

Group Attributes

JumpCloud Property JumpCloud UI Field Name SCIM v2 Mapping Application Value
name Name displayName Organization

Importing Users

This functionality is helpful if users have already been created in the application but have not been created in JumpCloud.

  1. Log in to the JumpCloud Admin Portal.
  2. Go to USER AUTHENTICATION > SSO Applications.
  3. Search for the application and click to open its configuration panel. 
  4. Select the Identity Management tab.
  5. Click manual import.
  6. Select the users you want to create in JumpCloud from the application from the list of users that appear. Users in the list have two import statuses:
  • New – The user has not been imported.
  • Imported – user has been imported and has an account in JumpCloud.

Tip: Try using the New Users-only filter when selecting users to import. This will move all of your new users to the top of the list, making them easier to identify and select.

  1. Click import.
  • If you are importing less than 100 users, your import results will display in real time and you can continue onboarding your users. 
  • If you have more than 100 users being imported, JumpCloud will send you an email when your import is complete.
  1. You can now connect and grant users access to all their JumpCloud resources. Learn more in the Authorize Users to an Application and Connecting Users to Resources articles.

Warning: Imported users must be members of a user group bound to an application for JumpCloud to manage their identity in, and access to, the application.

Removing the IdM Integration

To deactivate the IdM Integration

  1. Log in to the JumpCloud Admin Portal.
  3. Search for the application that you’d like to deactivate and click to open its details panel. 
  4. Under the company name and logo on the left hand panel, click the Deactivate IdM connection link.
  5. Click confirm
  6. If successful, you will receive a confirmation message.
  7. You can now delete the application.

To delete the application

  1. Log in to the JumpCloud Admin Portal.
  2. Go to USER AUTHENTICATION > SSO Applications.
  3. Search for the application that you’d like to delete and click to open its details panel.
  4. Check the box for the application.
  5. Click Delete.
  6. Enter the number of the applications you are deleting
  7. Click Delete Application.
  8. If successful, you will see an application deletion confirmation notification.

List IconIn this Article

Still Have Questions?

If you cannot find an answer to your question in our FAQ, you can always contact us.

Submit a Case